https://www.counteruavradar.com/en/categories/deployment-planning/ Recent content in Deployment Planning on Counter UAV Radar — Low-Altitude Surveillance Radar Hugo en-US Mon, 25 May 2026 00:00:00 +0800 https://www.counteruavradar.com/knowledge-base/where-should-counter-uas-radar-be-installed/ Tue, 21 Jul 2026 00:00:00 +0000 https://www.counteruavradar.com/knowledge-base/where-should-counter-uas-radar-be-installed/ <p>Where should counter-UAS radar be installed? There is no single correct answer. Airports, industrial sites, energy facilities, ports, borders, campuses, and temporary events all have different terrain, buildings, vegetation, roads, and restricted areas. The right radar position depends on the mission and the local environment.</p> <p>A more useful rule is this: install the radar where it can maintain stable visibility over the important low-altitude corridors, cover the boundary of the protected area, reduce obstruction and clutter, and still support power, networking, safety, and maintenance.</p> https://www.counteruavradar.com/knowledge-base/low-altitude-radar-site-survey-checklist/ Wed, 22 Jul 2026 00:00:00 +0000 https://www.counteruavradar.com/knowledge-base/low-altitude-radar-site-survey-checklist/ <p>A site survey before low-altitude radar deployment can determine whether the system will be useful after installation. Many projects focus on detection range, coverage angle, and classification capability during procurement. Once the radar is installed at a real site, however, buildings, trees, terrain, roads, metal structures, power, networking, and maintenance access all affect performance.</p> <p>A proper survey is not just a short visit with a few photos. It should connect the mission, the low-altitude environment, installation conditions, sensor integration, and acceptance criteria so that design, construction, and testing are based on the same assumptions.</p>